How to use 3M adhesive rubber pads?

3M adhesive rubber pads are often used in our lives. So, what is the method of using 3M adhesive rubber pads? What should I pay attention to in the process of using it? Here are some introductions.

Here is the content list:

• Instructions

• Precautions

Instructions

Firstly, the adhesive surface needs to be cleaned and dried. A mixture of isopropanol and water can be used for surface rubbing. After the surface is completely dry, proceed to the next step.

After the cleaning solvent is completely dried, the 3M adhesive rubber pad is attached to the surface of the adhered object and pressed. A roller or other method can be used to apply uniform pressure until it adheres.

After the 3M adhesive rubber pad is fully bonded, the release paper is torn off, and then the other side of the material that needs to be bonded is pasted, and the force is applied in the same way to achieve the best bonding effect. If bubbles are encountered, they need to be removed.

The best temperature is 15-38℃ for sticking 3M adhesive rubber pad, sticking below 10℃ will not achieve the best effect.

When bonding the 3M adhesive rubber pad, the force should be applied at a constant speed from one end to the other, otherwise, air bubbles will appear.

Precautions

The adhesive surface should be cleaned and dried before use to avoid affecting the viscosity of the 3M adhesive rubber pad.

Operators should not directly touch them with their hands during use, because their hands are generally dirty and sweaty. If they are directly touched, it will affect the use effect.

When using a 3M adhesive rubber pad, pay attention to the area. Generally speaking, the larger the area, the better the effective bonding effect.

Temperature is also very important. The suitable temperature range for 3M adhesive rubber pads is -5 to 25 degrees Celsius. Because of the glue, the glue will become soft when the temperature rises. Because the glue has relatively high fluidity, it can stick to the adherend well. On the contrary, when the temperature is low, the glue is very hard and does not Paste, when the operating temperature is lower than this, method one: find a way to increase the operating temperature. If it is not feasible to increase the operating temperature, the second method: please apply more pressure when attaching the adhesive tape (pressing back and forth with a scraper), or increase the standing time (at least forty hours before moving, and it is best to use it when placing it. The adhesive tape is facing up).

The 3M adhesive rubber pad is not completely solid, it is flowable like water. When the glue and the adherend are glued, it is not fast and completely fit, but the glue itself flows slowly, and gradually develops into close contact and adhesion. If there is external pressure between these, the time required for close contact can be greatly shortened. Generally, 5KG of pressure is required to make the effective adhesion area reach 70-80%.

Qingdao Gaofei Rubber & Plastic Products Co., Ltd. has been engaged in 3M adhesive rubber pads for many years. If you are interested in our high-quality products, you can contact us. https://www.gofairubber.com/.