content is empty!
1.3T 2.5T 5T Rubber Recess Former For Spherical Anchor Precast Concrete
The recess former in open position will be put over the anchor head. Closing the recess former will fix the anchor tightly. Afterwards, the recess former can be fixed to the formwork together with the anchor.
Email: grace@gofairubber.com
The recess plug is spread open and set over the anchor head and is then attached to the mould using the stamped metal plate with the fixing bolt and wing nut. On tightening the wing nut, the recess plug is pressed against the mould and clamped around the anchor head at the same time.
To extract the plug from the set concrete, reinforcement bars are to be inserted into the two openings provided. The plug is then levered out of the mould.
GET IN TOUCH
No.66 Huazhong Road, Hi-Tech Industrial Development Zone,
Qingdao, Shandong,China 266114
008653258717718
008653258717719
Welcome to Join GOFAI RUBBER Club
Copyright © 2020 QINGDAO GOFAI RUBBER & PLASTIC PRODUCTS CO.,LTD
Support by Leadong.