Suggestions for using sound isolation hanger

With the development of industry, the population base has skyrocketed, and the requirements for sound insulation of buildings are getting higher. Resilient mounting brackets with rubber is an innovative and effective measure. The traditional sound insulation mode resists noise by strengthening the thickness of the building itself, but it will make the load-bearing structure more likely to collapse when danger occurs, putting the cart before the horse. Here, we sincerely recommend the resilient hangers for drop ceiling to you, and explain its proper selection and use method.

 

Here is the content list:

l What test does quality of sound isolation hanger need to withstand?

l What are convenient features of sound isolation hanger?

l How to ensure the normal use of sound isolation hanger?

 

What test does quality of sound isolation hanger need to withstand?

The shock absorption performance of sound isolation hanger needs to be evaluated by shock absorption test. Usually, the sound isolation hanger vibration reduction test is only carried out in the case of new design and trial production.

After the resilient hangers for drop ceiling has passed the standard and put into mass production on the production line, each spring shock absorber will not be tested, only the final type test will be performed.

However, the sound isolation hanger customized by the customer must be tested one by one and adjusted after the vibration reduction test to meet the corresponding technical requirements.

 

What are convenient features of sound isolation hanger?

In residential and commercial purposes, sound isolation hanger is used as a sound insulation measure for ceilings, walls, and floors; in industry, industries isolation hanger is used to isolate various high-frequency mechanical equipment, such as fans, air-conditioning boxes, air-conditioning units, and power generation units, air compressors, water pumps, cooling towers, etc. The reason why sound isolation hangers have such a wide range of applications is inseparable from their characteristics.

1. The sound isolation hanger has very good mechanical properties, especially the ability of springs and silicone rubber materials to withstand extremely high loads;

2. Sound isolation hanger is a low-frequency isolator with a wide load range, can easily work under tensile or compressive loads, and has good recovery performance;

3. The progressive static stiffness of sound isolation hanger provides a relatively fixed natural frequency in a wide load range;

4. The sound isolation hanger has excellent resistance to grease, oil, solvent, water, dust and chemical substances, and it can maintain these excellent resistances even if used for a long time;

5. The sound isolation hanger has good damping characteristics;

6. The sound isolation hanger can provide greater deflection in all directions. This is especially useful when the device is exposed to vibration, causing displacement in all directions.

7. We can design, manufacture and debug according to customer needs, and provide global and 24/7 technical support.

 

How to ensure the normal use of sound isolation hanger?

The sound isolation hanger is loved by many customers because of its obvious vibration reduction effect. The important reason for its wider acceptance is that it is made of metal, so it has a longer service life than other types of shock absorbers.

However, it doesn't mean that the durable sound isolation hanger does not require maintenance, but the period is relatively long. Only by doing a good job in the maintenance of the sound isolation hanger can prolong its service life and keep up with most ideal working condition.

Generally speaking, because the sound isolation hanger itself has very good rust resistance, the maintenance work does not need to be too diligent. The best maintenance cycle is once a year. The materials used for maintenance are preferably oils that can withstand heavy loads, such as lubricants containing molybdenum disulfide.

To maintain the normal working condition of the spring vibration isolation hangers, it is necessary to conduct regular inspections and management to see whether its components are damaged, and if so, they must be replaced immediately. Regular inspection is conducive to better use of resilient hangers for dropping ceiling.

 

Because the industries isolation hanger is made of special metal materials and the body is hot-dip galvanized, it has a light and strong appearance and a long service life, but users cannot ignore its daily maintenance work. QINGDAO GOFAI RUBBER & PLASTIC PRODUCTS CO.,LTD hopes that each of our customers can use the resilient hangers for dropping ceiling rationally, maximize its value to acquire the best sound insulation and anti-vibration effects.