Qingdao Gofai Rubber produces various rubber ducckbill valve. Material is silicone/epdm/nbr/viton, etc Accept customized size and shape too. Email； chinarubber@aliyun.com
silicone rubber duckbill one way check valve stopper for Liquid and Gas Backflow Prevent * When installing the check valve special attention should be paid to the direction of flow of the medium and the normal flow direction of the medium should be consistent with the direction of the arrow indicated on the valve body otherwise the normal flow of the medium will be cut off. Opening the pressure is small generally open 1-5KPA pressure liquid or gas it can open, good sealing Easy to install.
silicone rubber duckbill one way check valve stopper for Liquid and Gas Backflow Prevent * When installing the check valve special attention should be paid to the direction of flow of the medium and the normal flow direction of the medium should be consistent with the direction of the arrow indicated on the valve body otherwise the normal flow of the medium will be cut off. Opening the pressure is small generally open 1-5KPA pressure liquid or gas it can open, good sealing Easy to install.
High Quality Rubber Recess Former with Screws and Wing Nuts for Precast Concrete Rubber Recess Former create accurate recesses to accommodate the Lifting Clutches during the casting process. Rubber Recess Former is produced from customized rubber formulation using pure material which allow optimum performance during application. Dimensions of each Recess Formers are engineered unique to the corresponding lifting clutches load classifications to minimize risks of errors.
● Protect BNC ports from being exposed and keep your network equipment safe from dust, debris and moisture, extending the lifespan of your device. ● Fit for any standard BNC ports of switches, routers, network cards & media converters and more. ● Made of high quality durable and reliable silicone material, exhibit a high level of resistance to harsh environmental factors and retain their shape and flexibility even after frequent use. ● Easy to insert and remove, fit snugly and stay in place.
2" x 2" External End Cap (Foot Stop) - 10 degree Offset End. This end cap cover fits nice and tight over any 2" x 2" square tube. All four sides have grooves. The side contacting the floor has grooves, which will aid in preventing slippage on smooth floor coverings. By installing this external cap, the hollow open end of 2" square tubing is finished off (capped off), and at the same time, a smart modernistic 10 degree offset angle end accents the base with the added value of acting as a "foot" to raise the frame off the floor 3/16" to help prevent the entire framework from rocking. Offset angle decreases chance of tripping.
English
