The GOFAI clips is designed for use with any wood, steel or concrete application where noise control is required. This includes, wood framed, steel framed, CMU, or concrete wall and or ceiling systems. The GOFAI clips assembly decouples the gypsum board from the structure, giving the assembly enhanced acoustical performance. 
The GOFAI clips fastens directly to the framing or structure. The GOFAI clips decouples the gypsum board from the structure stopping STC and IIC vibrations from entering the space adjacent.

-The rubber isolator mounts is using cutting edge polymer technology meet and exceed OEM specifications -Composite material with natural rubber by innovative synthesis make the rubber mounts more efficient and durable -They absorb vibrations caused by appliances, reduces noise and structural damage caused by these vibrations -Adapt to many kinds of motors make machine more stable supports dynamic performance and stability -The metal stud is two pieces terminated and bonded within the rubber that perform better isolation than go all the way through the rubber

The base has 1 bolt hole on base for rigid mounting when used for supporting machinery A nitrile friction pad on the base provides a non-skid surface. The ductile cast iron housing provides impact and fatigue resistance. The mount secures a heavy duty steel spring for absorbing shock and supporting the load, with nitrile sponge inserts to limit movement and prevent contact between upper and lower castings of the mount. The 110Lb payload of each hanger gives you space for heavy devices such as high end projector Can be preloaded to save valuable installation time Supplied with coupling nut Field interchangeable springs

Good Performance: This rubber shock damper can achieve a high degree of shock absorption effect in axial pressure and lateral pressure.
Scope of Application: Used in generators, engines and systems, the shock absorption effect is very good.
Good Shock Absorption Effect: The internal rubber and iron parts are full glued to provide the best shock absorption effect, in addition, safety lock parts are safety.
Professional Products: The shock damper can bear the pressure and shear force at the same time, and the rubber is firmly bonded through vulcanization and the bottom galvanized steel plate.

Material: made of high quality rubber. Durable and could be used for a long time. More stability and safety. Size: Hole diameter: 1.1 cm/0.43 in. This hole size is suitable for most brands of trekking poles. These tip protectors could prevent premature wearing of metal tips. Easy to install and remove and they are environmental because they minimize terrain scarring and prevent damage to nature.

The base has 1 bolt hole on base for rigid mounting when used for supporting machinery A nitrile friction pad on the base provides a non-skid surface. The ductile cast iron housing provides impact and fatigue resistance. The mount secures a heavy duty steel spring for absorbing shock and supporting the load, with nitrile sponge inserts to limit movement and prevent contact between upper and lower castings of the mount. The 110Lb payload of each hanger gives you space for heavy devices such as high end projector Can be preloaded to save valuable installation time Supplied with coupling nut Field interchangeable springs