Customized EPDM AC Drain Hose Rubber connector Elbow Fitting for Air Conditioner EPDM Rubber Drain Elbow Hose for Washing Machine Rubber Bellows are used as a cover or expansion joint to protect device or machines, which are made by rubber compression molding, rubber injection mold or extrusion tool. Rubber Bellows are designed as a cover mainly protect against dust, water, oil, grease, acids, bleaches, spatter or other environment elements.
1`Due to the long use time and the aging of the rubber ring, it is caused by the unstable operation of the lower pump and the deviation of the brake. It is recommended to replace once a year, the operation is simple, and the rubber can be replaced directly without removing the pump. 2`High temperature resistance, corrosion resistance and anti-aging.Suitable for automobile and motorcycle brake pump
EPDM Water Intercooler Silicone moulded radiator rubber hoses for the automotive EPDM rubber hose is suitable for various industrial and agricultural water pipes, air pipes, heat-resistant steam hoses, chemical-resistant hoses, and aging-resistant hoses. It has excellent anti-aging performance and chemical stability performance, especially suitable for outdoor anti-sun aging, has good resistance to ultraviolet rays and ozone, and has very stable performance to chemicals. Wide range of use, stable and reliable quality Structure/Material: Clamping tube: (inner rubber + fiber fabric reinforcement layer + outer rubber) full rubber hose: (outer rubber layer) 1. Inner rubber: EPDM rubber with air tightness resistance 2. Outer rubber: EPDM anti-aging rubber 3. Middle reinforcement layer: high-strength polyester fiber thread braided reinforcement structure.
Bespoke 4 Holes 2 Holes Universal Black Rubber Muffler Car Exhaust Hanger Bushing Insulator Tail Pipe Mount isolator 1. Reduce the height and contact surface between the exhaust pipe and the body 2. Effectively reduce the sound produced by the shaking and shaking of the exhaust pipe 3. Effectively reduce the sound produced by shaking and colliding with the car body or vibration of itself 4. The hanging glue that must be installed on the exhaust pipe if the enclosure is changed These are the problems that all people who have changed the exhaust pipe without changing the hard hanging glue will encounter
Rubber bellows and boots can be sourced as off-the-shelf or custom designs. Rubber bellows have versatile functions as “dust boots” or seals, used to seal out dust and other light-duty environmental factors while allowing a specific stroke or predetermined range of motion. They are quite common in industrial and automotive applications.
2" x 2" External End Cap (Foot Stop) - 10 degree Offset End. This end cap cover fits nice and tight over any 2" x 2" square tube. All four sides have grooves. The side contacting the floor has grooves, which will aid in preventing slippage on smooth floor coverings. By installing this external cap, the hollow open end of 2" square tubing is finished off (capped off), and at the same time, a smart modernistic 10 degree offset angle end accents the base with the added value of acting as a "foot" to raise the frame off the floor 3/16" to help prevent the entire framework from rocking. Offset angle decreases chance of tripping.