The GOFAI-C is designed for use with any wood, steel or concrete application where noise control is required. This includes, wood framed, steel framed, CMU, or concrete wall and or ceiling systems. The GOFAI-C assembly decouples the gypsum board from the structure, giving the assembly enhanced acoustical performance. With an Acoustical design load rating of 36 lbs per isolator, the GOFAI-C clip can supportup to two layers of 5/8" gypsum board when spaced no more that 24" x 48" oc. The GOFAI-C clip fastens directly to the framing or structure. The GOFAI-C decouples the gypsum board from the structure stopping STC and IIC vibrations from entering the space adjacent.

Sport and Gym Floating Floor acoustic soundproofing Vibration Isolation Rubber sound isolation Block Floor Floater The rubber vibration isolator is made of rubber through high temperature vulcanization molding. It is mainly used for vibration isolation of power equipment, massage bathtubs and floating structures. The upper end is concave and convex, which can increase friction and increase damping. Compare and reduce the natural frequency. The product is resistant to alkali, acid, oil, corrosion, mildew, moisture, flame, and aging. The temperature range is -20 ~ 90 ° C, the damping ratio is ≥0.08, and the vibration and sound insulation effects are good (the floating layer is reduced below) Vibrator spacing is generally 400 ~ 1000mm) EMAIL:grace@gofairubber.com

Floating Floor acoustic soundproofing Anti Vibration Rubber Damper Shock Absorber sound isolation Block Floor Floater 1. Inverted cone design: each inverted cone is hollowed out in the middle to form a semicircular cavity to increase flexibility during work. 2. It is made of vulcanized rubber, with 1-2 layers of nylon sandwiched in the middle of the plate, and melted into one body by hot melt during the vulcanization process, with high strength and integrated. 3. The convex grid line design is more anti-skid and shock absorption. 4. Floating Floor Rubber Damper Shock Absorber Acoustic Sheet ,Any splicing, easy to install.

Spring Vibration Isolator Rubber Shock Abosorer for Floor
1. Vibration isolation and sound insulation. The low frequency of the spring and the large damping characteristics of the damping pad can isolate both low-frequency vibration and low-frequency noise.
2. Easy installation. The shock absorber is evenly placed on the flat ground (generally a gap of 600-800mm), the middle is filled with sound-absorbing cotton, and the panel, waterproof layer, concrete floating layer, and floor are placed in that order.
3. Long service life. Strong and durable, the same life as the building structure.
4. Innovative design. The air in the bottom recess expands and compresses, increasing the damping, and also plays a good role in sound insulation.

sport and gym floating floor acoustic vibration isolating u boat floor floaters Rubber Joist sound isolation clips 
* Made of a specially-formulated, vibration-isolating rubber. * Help improve transmission loss (isolation). * Use U-Boats with Sheet Blok to ensure good isolation. * Molded to fit around the edge of a 2'x4'.