Anti Vibration Rubber Mount Rubber Isolator Shock Absorber Damper Feet for Water Pump Cooling Unit
1`Built-in steel lining, which forms annular shear deformation under pressure, is stable and does not break, and has good shock absorption effect.
2. Thickened high elastic rubber, good resilience.
3. Annular shock absorbing structure, large internal cavity diameter, large volume, good shock absorbing effect
4. Suitable for water pumps, fans, air-conditioning units, air compressors, diesel engines, chillers and other equipment.

Bell Shape Engine Vibration Isolator Mounting Rubber Damper Shock Absorber for Generator Pump Motor Compressor
The ALJ-33 mounts are a universal mounting for applications demanding maxinum vibraiton isolation. It is a further design with "soft rubber" make is suitable for both light and heavy machines. The product inner structure is the rubber strong bonding with the metal. In addition there is a safety lock in middle, locking the product. It is very reliable and durable corrosion protection make it well against liquate like driping oil and diesel.The metal cover also protects the elastomer inside from dripping oil, diesel, ozone and/or ultraviolet rays which can cause major damage to rubber. All metal parts on DH mounts have an anticorrosive treatment which is suitable for demanding outdoor applications where harsh environmental conditions are present.

Custom Plastic Injection Mold Solar Panel Cleaning Clip Water and Mud Drain Away Clip PV Module Cleaning Sprinkler Clips
The PV module water guide mud clip is installed at the lower edge of the module. When it rains, it will destroy the water tension
on the surface of the water area, and guide the water and dust at the lower edge of the frame in time to go over the frame and out during the process of water accumulation. The water formation stage basically solves the problem of water dust accumulation at the lower edge of the frame of the module.

Custom Plastic Injection Mold Solar Panel Cleaning Clip Water and Mud Drain Away Clip PV Module Cleaning Sprinkler Clips
The PV module water guide mud clip is installed at the lower edge of the module. When it rains, it will destroy the water tension
on the surface of the water area, and guide the water and dust at the lower edge of the frame in time to go over the frame and out during the process of water accumulation. The water formation stage basically solves the problem of water dust accumulation at the lower edge of the frame of the module.

Custom Solar PV Panel Plastic Insulation Wire Cable Clip MC4 Solar Connector Wire Clip Grounding Fixing Wire Clip
1. The plastic wire clip is easy to install, and the existing stainless steel wire clip in the market is difficult to install.
2. The installation of plastic clips will not damage the protective layer on the surface of the photovoltaic module frame, and the stainless steel clip will scratch the protective layer on the surface of the photovoltaic module frame during the installation process.
3. The plastic clip can avoid the circulation problem of the DC side cable caused by the stainless steel clip, and can avoid the loss of power generation caused by the circulating current.
4. Avoid arcing, melting, fire and other hidden dangers caused by repeated scouring of the MC4 joint by rainwater.

 

MC4 Male Female Solar Connectors Silicone Rubber Dust Cap Cover Dust Hat for Photovoltaic Module Solar Connector
* High quality silicone material, dustproof and waterproof.
* High heat resistance, low ignition point.
These dust covers are made by TE Connectivity and will fit all SunPower E-Flex panel MC4 connectors. If you are stowing away your panels for any period of time use these dust covers to protect the connectors from any dust & dirt ingress.



Don't forget you can also use these dust covers on the MC4 connectors on your PV extension wire.