Our Rubber balls can be used to clean screens. The rubber balls are applied to the material to be screened, and their bouncing activity creates frequent collisions with other balls indefinitely, the material to be screened and the screen itself stays clean. Such repeated movements make the passages in the screen frame open. We use natural rubber material which is characterized by low abrasion and high rebound elasticity to overcome the resulting abrasion pressure and to ensure the necessary bounce characteristics. This ensures the best outcomes possible during the cleaning process. Rubber balls have good resistance in contact with water, diluted acids and basis, alcohols. The behaviour of rubber balls is not suitable in contact with steam, oils, petrol and aromatic hydrocarbons, oxygen and ozone and in contact with ketone

Uav Aerial Damper Plate Shock Absorber Rubber Feet Drone Dji Mavic 3PRO Gimbal Camera Damping Ball Anti Vibration Silicone Rubber Ball
It is mainly used to eliminate the high frequency vibration of different frequencies generated by the aircraft during the flight, which is what we commonly call jitter. The image quality caused by the jitter is unsatisfactory, so it is particularly important to reduce the vibration phenomenon in the shooting process. This ball should be used in conjunction with a vibration damping frame or a vibration damping plate! The shock-absorbing ball has a reasonable design. Like a spindle spring, the vertical displacement can be 6-7mm, basically continuous compression, without sudden changes.
1. A single load bearing weight of 100g, a single resonance elimination ratio: 170Khz vibration absorption 90%, 120Khz absorption 82%, 85Khz absorption 60%;
2. Two load-bearing weights of 150g, two resonance elimination ratios: 170khz vibration absorption 88%, 120Khz absorption 88%, 85Khz absorption 78%; The mounting hole reference is a 9mm diameter circular hole shock absorber ball with the thickest part straight through 17mm.

Uav Aerial Damper Plate Shock Absorber Rubber Foot Drone Dji 2p M200 M300 Gimbal Camera Damping Ball Anti Vibration Silicone Rubber Ball
It is mainly used to eliminate the high frequency vibration of different frequencies generated by the aircraft during the flight, which is what we commonly call jitter. The image quality caused by the jitter is unsatisfactory, so it is particularly important to reduce the vibration phenomenon in the shooting process. This ball should be used in conjunction with a vibration damping frame or a vibration damping plate! The shock-absorbing ball has a reasonable design. Like a spindle spring, the vertical displacement can be 6-7mm, basically continuous compression, without sudden changes.
1. A single load bearing weight of 100g, a single resonance elimination ratio: 170Khz vibration absorption 90%, 120Khz absorption 82%, 85Khz absorption 60%;
2. Two load-bearing weights of 150g, two resonance elimination ratios: 170khz vibration absorption 88%, 120Khz absorption 88%, 85Khz absorption 78%; The mounting hole reference is a 9mm diameter circular hole shock absorber ball with the thickest part straight through 17mm.